This article will outline the steps in updating the time on the NXT locks using the handheld programmer.
You will need the black handheld programming device that came with the locks. (this is not the Android device used to program the modules)
- Turn on the device
- Scroll down on the handheld programmer to PC Synchronization and select
- Connect the programmer to the computer via the USB cord
- The programmer will show a message for the successful connection
- Make sure the time on the PC now matches the handheld programmer
- Take the programmer to the first lock and select Read Lock Info from the menu
- Touch the handheld to the lock induction area to read the time, if the time is different, then you will need to update the time
- Select Lock Maintenance on the handheld
- Select Adjust Time and hold the handheld to the lock induction area
- You will then see the success message, the time has been updated.
You can also update the date and time on the handheld by following the steps below:
- Choose Handset Settings
- Choose System Time
- Enter System Time manually.