First, you will need to clear the programming on the lock. You will need:
- Mechanical override key
- Authorization card
- Insert the key into the lock on which you wish to clear programming and turn the key.
- Swipe the Authorization card three (3) times while the lock is flashing red.
This will clear the programming on the lock and allow you to reprogram it.
To reprogram the lock for RFID use:
- Take the handheld programmer and the Authorization Key Card to the first lock.
- Hold the Authorization Key Card to the lock for 3 seconds. A blue light should show on the lock when successful.
- *If you see a red light, this means the action was unsuccessful. Return to the Hotel Intelligent System and read the authorization card. Go to "Files" menu and click "System setting", then place the authorization card that came with your encoder on the connected encoder and click "Read Authorization Card." This will associate the card with your programmer.
- Select “Lock Maintenance” on the handheld programmer.
- Select “Install Lock"
- Select the appropriate room number and click the green “OK” button on the programmer.
- Hold the programmer up to the lock for 3 seconds. You should see an “Operation Successful” message on the programmer.