Before you can reprogram an OpenKey NXT-150 lock, you must clear the existing programming.
What you will need:
- Mechanical override key
- Each lock has its own mechanical (metal) key
- If the metal key is lost, contact support@openkey.co for assistance
- Authorization card
- This card was provided at original lock deployment
- If the card is lost, contact A2K Direct for assistance https://a2kdirect.com/
1. Insert the metal key into the lock on which you wish to clear programming
2. Turn the key
3. While holding the key in the turned position, swipe the Authorization card three (3) times slowly
4. The lock will flash red during this process
These steps will clear the programming on the lock and allow you to reprogram it.